RV Toilet Foot Pedal Repair: Do It Yourself

If you have a broken RV toilet foot pedal, you try avoiding using the RV toilet. That’s because a broken toilet pedal causes leakage when you flash it. But it was supposed to flash the toilet wastage after pressing. 

Is your RV toilet foot pedal damaged and causes leakage when you flash it? Then, you must start the RV toilet foot pedal repair as soon as possible. Until you repair it, you cannot use your RV toilet. 

So, how to repair your broken or damaged RV toilet foot pedal? When your RV toilet foot pedal falls off, the first thing you do is looking for a mechanic, isn’t so?

Indeed, the severe damage of the RV toilet foot pedal needs a mechanic. But before that, you have to find out where it is located and what causes its leakage. 

Without making any further delay, let’s start the article and know all of these. 

What RV foot pedal?

RV foot pedal is the Toilet flash, which is situated underneath the toilet nearer to your feet. When you need to flush the toilet, you have to press the beat with your leg. 

The flash is placed behind the Toilet at most home toilets, But the thing is not the same for the RV toilets. The placement of flash near to the feet makes the bathroom easy to use for the users. 

Although all the RV toilets, including the flash simultaneously, its functionality can be different. The variance of toilet flash’s functionality depends on the types of Toilet your RV toilet has! 

How does the RV foot pedal work?

As we said, the RV foot pedal is placed underneath the toilet bowl. After using the toilet, you’ve to press the pedal with the leg to rinse the water into the toilet bowl. 

When you press the toilet pedal, it opens the gate valve. The valve gate allows the water to come out from the water line and exit the wastage to the other line. That’s how the RV foot pedal works to clean the toilet wastage. 

How to make RV foot pedal repair?

Repairing the old or broken RV toilet foot pedal needs to replace it with a new one. If your toilet foot pedal is broken and causes leakage when flashing, that means you’ve to replace it. 

But, how to make RV foot pedal repair? Let’s understand the consecutive process of repairing the foot pedal and the things we’ll need for that. 

Things you’ll need

  • A new toilet foot pedal 
  • Closet flange seal
  • Instruction sheet
  • Towel
  • Plastic trash bag
  • 1/2-inch wrench 
  • Hand gloves 
Related Post: RV Tire Repair: Complete Guide For Beginners

Things you need to do

Step 1: Read the instruction 

When you purchase a new pedal for your RV toilet, you’ll get an instruction book with it. Before starting the repairing process, read the instruction which is given in the book. 

If you start the repair after reading the instructions, you can avoid making any mistakes during replacement. Moreover, installing and reinstalling the toilet will be easier if you know the instructions. 

Step 2: Flush the Toilet to the drainage. 

Flash the toilet and rinse the water into the bathroom. Make sure you have cleaned the wastage of the bathroom thoroughly. It is a significant step to reduce the odor from the toilet. 

Indeed, the odor of the toilet makes you uncomfortable while repairing the foot pedal. You have to flash the toilet wastage at least a few hours before starting the replacement. 

Step 3: Reduce the odor from the toilet

Not only the toilet drainage, clean the entire RV toilet so that no odor comes from it. Use sufficient water to rinse and clean the complete RV toilet. 

Step 4: Disconnect the water supply line from the RV toilet. 

When repairing the toilet foot pedal, the water leakage from the joint must disrupt your work. So, you have to become precautious regarding the water leakage. 

Check the RV owner’s manual. According to the manual direction, turn off the RV toilet’s flash. 

Disconnect the water supply line from your RV toilet to prevent water leakage. To hold the water of the toilet, put a towel under the water connection. 

Related Post: How To Clean Weep Holes In RV Windows?

Step 5: Remove the bolt covers and nuts from the toilet 

Confiscate the bolt covers and nuts to remove your RV toilet. After removing the covers and nuts, shifting the toilet will be easier for you.

Bring out the RV toilet from its position and put it into the trash bag. Afterward, cover the RV holding tank with a rag or old cloth. It will save you from any unwanted odors which may come from the opened toilet.

Step 6: Eradicate the damaged flange seal. 

It is time to eradicate your damaged and older closet flange seal. After replacing the foot pedal, you have to set the toilet into its previous place. The older and damaged seal cannot stick to the toilet properly like before.

Therefore, you have to remove the flange seal in this step and make it easier to put the new seal. 

Step 7: Place the Toilet on the floor 

Here comes your principal task: repairing the cracked foot pedal and replacing it with a new one. Keep the toilet on the floor, putting the side upward where there’s the pedal.

Step 8: Remove the foot pedal from the toilet 

With the wrench, grab the underside of the pedal and pull it in a quick motion. It should come out on the first try. If you fail to bring out the pedal the first time, give it another go.  

Step 9: Place the new RV foot pedal onto the toilet 

Place the new RV foot pedal onto the pedal pivot and rotate it slightly. After a few rotations, its drive arm pin should line up with pocket B. 

Attach the paddle button with the right place of paddle snaps. You will find the paddle button below at the outside of the paddle. 

Step 10: Check the activity of the foot pedal with trial 

Upright the RV toilet and check the activity of its foot pedal. Press the pedal several times to ensure it is working correctly. 

Have you got any problems during the opening and closing of the wastage ball? If not, that means you have done a great job of installing the new foot pedal with the RV. 

Related Post: RV Transmission Repair: The Ultimate Guide For(Beginners)

Step 11: Put a fresh closet flange seal. 

After replacing the pedal into the RV toilet, you have to place it in its exact place. For this, you have to put a fresh closet flange seal from where you’ve removed the older seal. Remove the towel from your holding tank to uncover it. 

Step 12: Reinstall the Toilet in its exact place. 

Finally, it comes to reinstall your toilet in its exact place where you’ve placed the fresh closet flange seal. Align the closet bolts and the toilet’s mountain holes while putting the bathroom in its place. 

Step 13: Tighten the nuts and replace the bolts. 

Replace the bolts of the toilet with the newer ones. Using the wrench, now tighten the nuts and bolts of the bathroom to lose track. But avoid over-tightening the nuts and bolts.

Remember, the overtightening of the nuts and bolts might crack the toilet. Also, re-opening the nuts and bolts will become complicated when it’s time for a further replacement. 

Step 14: Reconnect the water supply. 

After placing the toilet in its place, reconnect the water supply. Switch on the water supply line and make water available for water. 

Step 15: Flush the Toilet to make a test 

To ensure there is no leakage or problem in the toilet, you must conduct a final test. Flush the toilet to ensure all its connections are okay and there is no leakage from its foot pedal. 

Related Post: RV Brake Repair: Complete Guide (For Beginners)

Here are some tips for protecting the RV toilet foot pedal from getting damaged 

Before going through the RV foot pedal repair, you must know what causes its leakage. Preventing the RV foot pedal leakage is possible only when you know the reasons behind the leakage.

Here are some everyday things which cause RV toilet foot pedal damage and leakage. 


The first and most common cause of RV toilets getting damaged is the cold. It makes the RV toilet valve brittle and which consequences the crack after some period. 

If you don’t repair your cracked toilet pedal, soon, it will break entirely. Now, what to do to protect an RV toilet pedal from getting cracked? You can save your RV toilet from the cold by sheltering it during the winter season. 

The shelter on the RV will make its inside warm; consequently, there will be no risk of getting brittle. 


If your RV toilet pedal is made of metal, it is at a higher risk of getting rusted. And unfortunately, almost all the RV toilet foot pedals are made of metal. The rust occurs due to the water leakage on the metal pedal.

Now, if you want to protect your metal toilet pedal from rust, you have to check it regularly. The valve and spray of the toilet are most prone to getting rusted. So, make sure water doesn’t accumulate on these.  

Wear and tears

The RV toilet is a part of the RV vehicle, and the vehicle must move when driving it. Any parts of the vehicle might get damaged during its driving, mainly when the road is uneven. 

Along with checking the toilet’s valve, you must drive the RV carefully to avoid damages. Drive the vehicle carefully when going through rough terrain. Rotate the tires of the RV after a specific period to run it evenly on the road. 

Buildup sediment around the pedal

The buildup of sediment around the pedal is the main and crucial of the RV toilet foot leakage. For the extreme weather, there is sediment around your RV toilet foot pedal. The sediment also causes you don’t clean your RV toilet for a long time. 

However, the sediment of the foot pedal breaks by itself at one time. As a consequence, the intake valve gets damaged or dies. 

Replacing the older pedal, you can quickly get rid of the sediment of the toilet foot pedal.  

Related Post: How To Replace An RV Awning Roller Tube?

Related Question:

How do I identify my RV toilet?

Each RV toilet has a model number that specifies what types of toilet it is! For instance, model 300 indicates it is a plastic Toilet. Conversely, model 310 shows it is a ceramic RV toilet. 

The model number is written behind the bowl of the RV toilet close to the floor. 

Why don’t more RV toilets have the foot pedal flusher?

There are lots of RV toilets that feature the foot pedal flusher. You will still find many RV toilets that have installed hand flushers instead of the foot pedal flusher. 

The RV toilet, which has a hand flusher, is a conventional toilet. Although both of the flushing systems have similar functionalities, some users consider the hand flusher more convenient to use. 

Regardless, the RV toilet handle flusher saves many mechanics, whereas the foot pedal needs additional mechanics. Possibly, that’s why many RV toilets use the hand flusher instead of the foot pedal flusher. 

How to add a foot pedal to the RV toilet to life the lid?

If you have a broken or damaged RV toilet foot pedal, you can add it using our given methods. Regardless, you can also add a new foot pedal to maintain a hygienic RV toilet. 

Indeed, using the foot pedal is the best way to maintain a hygienic toilet after using it. However, if you want to place a foot pedal in your RV toilet, keep the following steps. Trust us; these are the simplest and easiest way of installing a new foot pedal with the RV Toilet. 

Step 1: Eradicate the pull chain from your toilet tank, which is in your toilet flapper.

Step 2: Keep the pedal flusher on the floor and add its cable with the tank chain. You hardly know that the inflatable ball is called the heart of the toilet foot pedal. 

Step 3: The chain will facilitate the toilet’s flushing system hygienically. 

Why won’t my RV toilet hold water (With fixes)?

After flushing, each toilet holds a small amount of water below to reduce the odors. So, if your RV toilet doesn’t have water after flushing, it might be a huge problem.

The blade seal’s damages or failure is the primary cause of an RV toilet not holding water. You have to solve the issues as soon as possible if your bathroom fails to keep the water. 

Before that, make sure this is the problem hampering your toilet’s flushing effectiveness. Afterward, go for replacing the RV toilet bowl seals. 

Here are the mandatory things you need to do for repairing your toilet bowl seals. 

Step 1: First of all, flush off the toilet properly so that no wastage or odor remains in the toilet 

Step 2: Disconnect the water connection so that water leakage doesn’t hamper the work. 

Step 3:Take out the nuts and bolts to remove the toilet from the RV floor. Keep the RV toilet in a trash bag in your workplace.

Step 4: Cover the opened wastage hole with a rag cloth.
Step 5:Figure out the rubber ring, remove the old seal from it, and place a new seal. 

Step 6: Reinstall the Toilet in its location and attach the water supply with it. Check the activity of the toilet by flushing it frequently. 

If the flushed water goes smoothly and the toilet can hold some water, it is ready to use. 

Related Post: RV Slide Out Water Damage Repair: (Complete Guide For Beginners)


A toilet is an essential part of the RV vehicle, particularly when you’re a traveler or camper. When camping or giving a tour, a person has nothing to use regardless of the RV toilet. That’s why an RV owner has to take the highest care of his RV toilet. 

And using the RV toilet foot pedal is one of the best ways to keep the toilet hygienic. But, how to make an RV toilet foot pedal repair after breakage or damages? 

Hopefully, you’ve got complete guidance in repairing your old and damaged RV toilet foot pedal. 

Related Post: RV Window Seal Creep Repair: Complete Guide (For Beginners)
Related Post: RV Fiberglass Crack Repair Complete Guide (For Beginners)
Scroll to Top